16mm 2 LPH
Max-Emitterline tubing available in 16mm and 20mm with 2, 4, and 8 LPH flow rates.
The Ore-Max Component Library
Every part of a heap leach irrigation system, engineered for mining.
From plug-resistant emitterline to magnetic flow meters and drainage pipe — Ore-Max designs and supplies the entire end-to-end system. Browse the categories below or jump into the catalog.
Component Library
Seven categories. One integrated heap leach system.
Each category below is engineered to plug into the same hydraulic profile — so what gets specified on paper is what shows up in the field.
Max-Emitterline
The key component of every Ore-Max leach system. Plug-resistant emitterline holds constant solution application across the entire pad — every emitter delivers the designed flow rate at the designed pressure.
See moreSun Flow Lay Flat Hose
Mining-grade lay flat lateral hose engineered for the conditions of a heap leach pad — rugged enough to take the punishment, light enough to redeploy as the pad advances.
See moreLay Flat Fittings & Connectors
A complete line of mining fittings for tying emitterline into Sun Flow lateral tube and laterals into the header. Built for fast field assembly and the chemistry of leach solution.
See moreSprinkler Systems
When the design calls for it, the Max-Spinner delivers full sprinkler-system coverage with the same uniformity Ore-Max engineers into every drip layout.
See morePressure Regulators
Pressure has to stay equal across the system if the solution is going to land equally on the ore. Ore-Max regulators hold the line from header to emitterline so application stays in spec.
See moreFlow Meters
A complete line of magnetic flow meters for precise control of the heap-leach hydraulics. Pair them with regulators to monitor and tune zone-by-zone application.
See moreDrainage Pipe
High-quality drainage pipe sized for mining service — engineered to move pregnant solution off the pad reliably, year after year.
See moreProduct Catalog
Every published Ore-Max part, in one place.
Each product page carries technical data, recommended use, and add-to-quote actions — so you can move from spec to RFQ without leaving the site.
16mm 4 LPH
Max-Emitterline tubing available in 16mm and 20mm with 2, 4, and 8 LPH flow rates.
16mm 8 LPH
Max-Emitterline tubing available in 16mm and 20mm with 2, 4, and 8 LPH flow rates.
20mm 2 LPH
Max-Emitterline tubing available in 16mm and 20mm with 2, 4, and 8 LPH flow rates.
20mm 4 LPH
Max-Emitterline tubing available in 16mm and 20mm with 2, 4, and 8 LPH flow rates.
20mm 8 LPH
Max-Emitterline tubing available in 16mm and 20mm with 2, 4, and 8 LPH flow rates.
High Grade Emitterline
High Grade emitterline available in 1.1, 1.5, 2.1, 3.8, and 7.8 LPH configurations.
Ore-Max Slimline Dripline
Ore-Max Slimline emitterline available in 0.8, 1.3, 1.6, 2.4, and 4.0 LPH configurations.
Hose X Hose Coupler
Hose x Hose Couplers join matching Max-Emitterline hose sections with locking-cap connections.
Lay Flat x Hose Connector
Lay Flat x Hose Connectors transition lay-flat supply hose into 16mm, 18mm, or 20mm Max-Emitterline laterals.
MPT Hose Connector
MPT Hose Connectors adapt 1/2 inch or 3/4 inch male pipe thread takeoffs to Max-Emitterline hose.
Tee Connector
Tee Connectors branch Max-Emitterline hose laterals in 16mm, 18mm, and 20mm sizes.
FPT Swivel Connector
FPT Swivel Connectors adapt 3/4 inch female pipe thread hookups to Max-Emitterline hose sizes.
Hose Thread Connector
Hose Thread Connectors adapt 3/4 inch hose-thread hookups to 16mm, 18mm, or 20mm Max-Emitterline hose.
Elbow Connector
Hose elbow connectors provide 90-degree turns for Max-Emitterline hose laterals in 16mm, 18mm, and 20mm sizes.
Low Pressure Automatic Valve
Low Pressure Automatic Valves provide automatic flush service for Max-Emitterline laterals.
High Pressure Automatic Valve
High Pressure Automatic Valves support automatic flushing and service on 16mm, 18mm, and 20mm lines.
MPT Tee
MPT Tee fittings add a threaded branch connection to 16mm, 18mm, or 20mm Max-Emitterline laterals.
MPT Y
MPT Y connectors split male-threaded takeoffs into paired Max-Emitterline hose connections.
Female Hose Swivel Y
Female Hose Swivel Y connectors split threaded hose connections into 16mm, 18mm, or 20mm Max-Emitterline takeoffs.
MPT Plug
Durable polyethylene male-threaded plugs for closing off pressurized pipe or manifold takeoffs in irrigation systems.
Figure 8 End Closure
Figure 8 End Closures secure the end of 16mm, 18mm, and 20mm Max-Emitterline laterals.
Oval End Closure
Oval End Closures terminate Max-Emitterline laterals with integrated flush-valve service.
Tape Coupling
Durable fittings, valves, and start connectors engineered for 5/8" and 7/8" drip tape irrigation lines.
Female Hose Swivel
Durable fittings, valves, and start connectors engineered for 5/8" and 7/8" drip tape irrigation lines.
MPT Adapter
Durable fittings, valves, and start connectors engineered for 5/8" and 7/8" drip tape irrigation lines.
MPT Tee
Durable fittings, valves, and start connectors engineered for 5/8" and 7/8" drip tape irrigation lines.
Low Pressure Automatic Valve
Durable fittings, valves, and start connectors engineered for 5/8" and 7/8" drip tape irrigation lines.
High Pressure Automatic Valve
Durable fittings, valves, and start connectors engineered for 5/8" and 7/8" drip tape irrigation lines.
Tape x Lay Flat Connector
Durable fittings, valves, and start connectors engineered for 5/8" and 7/8" drip tape irrigation lines.
Lay Flat Threaded Adapter
Layflat connector with 1/2" FPT x 3/4" MPT threads for drip tape to lay flat hose transitions.
MPT Hose Mini Valve
MPT Hose Mini Valves combine threaded takeoffs with compact flow control for Max-Emitterline hose.
Hose Coupling Mini Valve
Hose Coupling Mini Valves add in-line control for 16mm and 18mm Max-Emitterline hose connections.
Barbed Mini Valve
Barbed Mini Valves add compact flow control with vacuum-breaker protection for Max-Emitterline laterals.
Tape MPT Mini Valve
Durable fittings, valves, and start connectors engineered for 5/8" and 7/8" drip tape irrigation lines.
Tape Coupling Mini Valve
Durable fittings, valves, and start connectors engineered for 5/8" and 7/8" drip tape irrigation lines.
Tape Lay Flat Mini Valve
Durable fittings, valves, and start connectors engineered for 5/8" and 7/8" drip tape irrigation lines.
Sun-Flow SF-50 Hose
Sun-Flow SF-50 Lay Flat Hose provides heavier-duty lay-flat distribution in 1.5 inch through 8 inch sizes.
Sun-Flow SF-10 Hose
Sun-Flow SF-10 Lay Flat Hose provides lightweight lay-flat distribution in 1.5 inch through 8 inch sizes.
Red Layflat with Fittings
Dedicated red layflat hose assembly with fitted connections for heap leach distribution layouts.
T-Bolt Clamps
Insert couplings, reducers, adapters, elbows, tees, plugs, flange adapters, and 316 stainless T-bolt clamps engineered for Ore-Max lay flat hose assemblies.
Insert Female Threaded Adapters
Insert couplings, reducers, adapters, elbows, tees, plugs, flange adapters, and 316 stainless T-bolt clamps engineered for Ore-Max lay flat hose assemblies.
Insert Male Threaded Adapters
Insert couplings, reducers, adapters, elbows, tees, plugs, flange adapters, and 316 stainless T-bolt clamps engineered for Ore-Max lay flat hose assemblies.
Insert Elbows
Insert couplings, reducers, adapters, elbows, tees, plugs, flange adapters, and 316 stainless T-bolt clamps engineered for Ore-Max lay flat hose assemblies.
Insert Tees
Insert couplings, reducers, adapters, elbows, tees, plugs, flange adapters, and 316 stainless T-bolt clamps engineered for Ore-Max lay flat hose assemblies.
Insert Couplings
Insert couplings, reducers, adapters, elbows, tees, plugs, flange adapters, and 316 stainless T-bolt clamps engineered for Ore-Max lay flat hose assemblies.
Insert Plugs
Insert couplings, reducers, adapters, elbows, tees, plugs, flange adapters, and 316 stainless T-bolt clamps engineered for Ore-Max lay flat hose assemblies.
Insert Reducers
Insert couplings, reducers, adapters, elbows, tees, plugs, flange adapters, and 316 stainless T-bolt clamps engineered for Ore-Max lay flat hose assemblies.
Insert Flange Adapters
Insert couplings, reducers, adapters, elbows, tees, plugs, flange adapters, and 316 stainless T-bolt clamps engineered for Ore-Max lay flat hose assemblies.
Hole Cutter
Installation tools, hose cutters, and pressure gauges that support lay flat hose field assembly and monitoring.
Installation Tools
Installation tools, hose cutters, and pressure gauges that support lay flat hose field assembly and monitoring.
Pressure Gauges
Installation tools, hose cutters, and pressure gauges that support lay flat hose field assembly and monitoring.
Pressure Regulators Without Fittings
Fixed-outlet pressure regulators engineered for heap leach drip and emitterline systems — available in 10 / 15 / 20 PSI, regulator-only, hose x hose, and lay flat x hose configurations.
Hose x Hose Pressure Regulators
Fixed-outlet pressure regulators engineered for heap leach drip and emitterline systems — available in 10 / 15 / 20 PSI, regulator-only, hose x hose, and lay flat x hose configurations.
Lay Flat x Hose Pressure Regulators
Fixed-outlet pressure regulators engineered for heap leach drip and emitterline systems — available in 10 / 15 / 20 PSI, regulator-only, hose x hose, and lay flat x hose configurations.
Max-Spinner Assembly
Max-Spinner Assemblies include stake, feedtube, and spinner components for low-pressure sprinkler coverage.
Max-Spinner Only
Max-Spinner Only provides the replacement spinner head without stake or feedtube components.
Standard Wobbler
CMS Wobbler, Xcel-Wobbler, and mini-Wobbler micro-sprinklers for heap leach irrigation — uniform coverage at low pressure from a single moving part.
Xcel-Wobbler
CMS Wobbler, Xcel-Wobbler, and mini-Wobbler micro-sprinklers for heap leach irrigation — uniform coverage at low pressure from a single moving part.
Mini-Wobbler
CMS Wobbler, Xcel-Wobbler, and mini-Wobbler micro-sprinklers for heap leach irrigation — uniform coverage at low pressure from a single moving part.
PVC Riser
Risers, tubing, punch tools, and barb adapters engineered for Senninger Wobbler and mini-Wobbler sprinkler installations.
Riser Adapter
Risers, tubing, punch tools, and barb adapters engineered for Senninger Wobbler and mini-Wobbler sprinkler installations.
Tubing
Risers, tubing, punch tools, and barb adapters engineered for Senninger Wobbler and mini-Wobbler sprinkler installations.
Punch Tool
Risers, tubing, punch tools, and barb adapters engineered for Senninger Wobbler and mini-Wobbler sprinkler installations.
Corrugated Perforated Pipe
Single-wall and double-wall smooth-core HDPE drainage pipe for heap-leach pad underdrain and lixiviant collection — ten diameters from 3" (75 mm) to 24" (600 mm), perforated or non-perforated, with a complete fittings line.
HDPE Pipe and Fittings
PE 4710 HDPE pipe and fittings with SDR 7 through SDR 32.5 options and pressure ratings from 63 to 330 PSI for mining irrigation systems.
Hexabird Float
Interlocking HDPE pond cover float with 41.6 sq in surface area per unit for waterfowl deterrence, evaporation reduction, and 15-year leach pond service.
Restrained Joint PVC Pipe
Grooved restrained-joint PVC pipe and fittings for heap leach mainlines — 2" through 12", DR 17 / DR 21, pressure-rated to 250 PSI, compatible with Certa-Lok Yelomine.
Restrained Joint PVC Couplings
Grooved restrained-joint PVC pipe and fittings for heap leach mainlines — 2" through 12", DR 17 / DR 21, pressure-rated to 250 PSI, compatible with Certa-Lok Yelomine.
Restrained Joint PVC 90 Elbows
Grooved restrained-joint PVC pipe and fittings for heap leach mainlines — 2" through 12", DR 17 / DR 21, pressure-rated to 250 PSI, compatible with Certa-Lok Yelomine.
Restrained Joint PVC 45 Elbows
Grooved restrained-joint PVC pipe and fittings for heap leach mainlines — 2" through 12", DR 17 / DR 21, pressure-rated to 250 PSI, compatible with Certa-Lok Yelomine.
Restrained Joint PVC Tees
Grooved restrained-joint PVC pipe and fittings for heap leach mainlines — 2" through 12", DR 17 / DR 21, pressure-rated to 250 PSI, compatible with Certa-Lok Yelomine.
Restrained Joint PVC Reducing Tees
Grooved restrained-joint PVC pipe and fittings for heap leach mainlines — 2" through 12", DR 17 / DR 21, pressure-rated to 250 PSI, compatible with Certa-Lok Yelomine.
Restrained Joint PVC End Caps
Grooved restrained-joint PVC pipe and fittings for heap leach mainlines — 2" through 12", DR 17 / DR 21, pressure-rated to 250 PSI, compatible with Certa-Lok Yelomine.
Restrained Joint PVC Flange Adapters
Grooved restrained-joint PVC pipe and fittings for heap leach mainlines — 2" through 12", DR 17 / DR 21, pressure-rated to 250 PSI, compatible with Certa-Lok Yelomine.
Wafer and Lug Butterfly Valves
2.5" Lever-Operated Butterfly Valve – Wafer / Lug
PVC Polypropylene Butterfly Valves
PVC/Polypropylene butterfly valves with EPDM or Viton liners for heap leach flow control, 1 1/2" to 12" in lever or gear-operated configurations.
PVDF Viton Butterfly Valves
PVDF-body butterfly valves with Viton liners/seats for corrosive heap leach service, 1 1/2" to 12" in lever or gear-operated configurations.
True Union PVC Ball Valves
Schedule 80 PVC ball valves for heap leach irrigation — True Union (repairable) and Compact (economical) bodies, 1/2" through 4".
Compact PVC Ball Valves
Schedule 80 PVC ball valves for heap leach irrigation — True Union (repairable) and Compact (economical) bodies, 1/2" through 4".
Magnetic Flow Meter
Magnetic Flow Meters provide flanged flow measurement for heap leach irrigation lines from 4 inch to 10 inch.
900 Series Tornado Filter
Self-cleaning stainless-steel inline water filter for heap leach irrigation — 2"–12" flanged body with diffusion-bonded 316/316L screens in 24, 40, 60, 80, 120, 150, or 200 mesh.
Quote Builder
Build a starter scope, then loop in our engineers.
Use this interactive tool to pre-select the components you have in mind. We'll review the selection alongside your hydraulic profile and send back a scoped quote.
Select Components
Choose components to sketch a preliminary Ore-Max system configuration.
Your System Outline
This quick builder helps visualize component selection prior to quote request.
Select at least one component to build your draft system.
Ready for a Complete System Proposal?
Send your selected components and site constraints to Ore-Max for engineering review and quote support.